Design and Construction of a Micro-Controller Based Liquid Level Detecting System
ABSTRACT
The project is based on the design and construction of a micro-controller based liquid level detector. This is a system that will measure the level of liquid in a container and display the level on 3 seven segment display screen. The system will output an audio and visual alerting indicator when the tank is full and when the tank is empty. This alarm can be re-set using an override switch.
This feat is achieved using a programmable integrated circuit that is programmed using assembly language as well as other integrated circuits such as a seven segment display driver, a multiplexer and logic gates. Also, I used other discrete components such as resistors, transistors, capacitors, diodes etc.
After the design, construction and implementation, the system functioned satisfactorily as a microcontroller based liquid level detector system with digital display readout.
Copyright © 2023 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
If you like this article, see others like it:
- Optimization of Battery Management System (BMS) for Nanosatellite
- Development of Software for Life Cycle Cost Analysis of Solar Photovoltaic and Diesel Generator Systems in Nigeria
- Design and Construction of 1.5 KVA Inverter
- Construction of Step Up Transformer with Multi-Output
- Construction of Battery Charge Control for Photovoltaic Systems