Design and Construction of Security Lighting Control System Using Mobile Phone
ABSTRACT
This project aims at the design and construction of a security lighting control system using a mobile phone to serve as a remote control to control security lights. The device is made up of four main units. The mobile phone which is serving as a transmitter for remotely controlling the security lights. The GSM modem which serves as the receiver. A sim card is placed in the GSM modem and all messages from the transmitter are sent to that mobile number. The microcontroller unit processes the information extracts the message from the GSM modem and processes it. Then it either puts on a pin or leaves it off. The switching unit is responsible for putting on or off the bulb depending on the output from the microcontroller.
Upon completion of the project, it was tested and it worked properly. “light_on” puts on the bulb and “light_off” puts off the bulb. Thus an effective and reliable security lighting control system using mobile phone was realized.
Copyright © 2023 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0
If you like this article, see others like it:
- Optimization of Battery Management System (BMS) for Nanosatellite
- Development of Software for Life Cycle Cost Analysis of Solar Photovoltaic and Diesel Generator Systems in Nigeria
- Design and Construction of 1.5 KVA Inverter
- Construction of Step Up Transformer with Multi-Output
- Construction of Battery Charge Control for Photovoltaic Systems